Synthetic heavy-duty engine oil engineered for modern diesel powertrains. Its advanced additive system provides superior wear protection, high thermal and oxidative stability, and excellent shear and low-friction performance for reliable operation under severe conditions. Designed for extended drain intervals, turbocharger and piston protection, and optimal low-temperature fluidity for cold starts. Compatible with contemporary heavy-duty engines equipped with after-treatment systems, delivering fuel efficiency, reduced emissions, and consistent performance across a wide range of operating conditions.
Cyclon EVO ULTRA MAXX 10W-40 is part of the Cyclon range for Trucks, available in Iraq and the Kurdistan Region through Ziyut Al Adaa.
| (MB 228.52) |
| ACEA API CK-4 |
| ACEA E11 |
| ACEA E4 |
| ACEA E7 |
| ACEA E8 |
| Caterpillar ECF-3 |
| Cummins CES 20081 |
| Cummins CES 20086 |
| DAF PSQL 2.1E-LD |
| Deutz DQCIV-18 LA |
| DFS 93K222 |
| DTFR 15C100(MB 228.31) |
| DTFR 15C110 (approved) (MB 228.51) |
| DTFR 15C120 (approved) |
| JASO DH-2 |
| M3271-1 |
| Mack EOS-4.5 |
| MAN M3477-1 |
| MAN M3775 |
| MTU Cat. 2.1 |
| MTU Cat. 3.1 |
| Renault Trucks RLD -4 |
| SCANIA Low Ash |
| Volvo VDS-4.5 |
| 208L |
| 20L (PAIL) |
| 4 x 5L |
Cyclon EVO ULTRA MAXX 10W-40 meets (MB 228.52), ACEA API CK-4, ACEA E11, ACEA E4, ACEA E7, ACEA E8, Caterpillar ECF-3, Cummins CES 20081, Cummins CES 20086, DAF PSQL 2.1E-LD, Deutz DQCIV-18 LA, DFS 93K222, DTFR 15C100(MB 228.31), DTFR 15C110 (approved) (MB 228.51), DTFR 15C120 (approved), JASO DH-2, M3271-1, Mack EOS-4.5, MAN M3477-1, MAN M3775, MTU Cat. 2.1, MTU Cat. 3.1, Renault Trucks RLD -4, SCANIA Low Ash, Volvo VDS-4.5.
Cyclon EVO ULTRA MAXX 10W-40 is supplied in Iraq and the Kurdistan Region in the following pack sizes: 208L, 20L (PAIL), 4 x 5L.
Cyclon lubricants are distributed in Iraq and the Kurdistan Region by Ziyut Al Adaa, the official and exclusive distributor, supplying workshops, fleets, industry and retail from branches in Baghdad, Erbil and Suleymania. Call +964 750 550 6300 or send an enquiry through the contact page.
